Download Lineage OS For Moto E 2015 or Moto E2 Android Nougat 7.1.1 [Surnia] with VoLTE SupportLINEAGE OS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

Note: You will only get volte if your modem baseband firmware supports it of you Moto e 2nd gen device. Some models of surnia don't support volte on the baseband.

xt1521: It will work for sure if your baseband is up-to-date with what moto released in 6.0.1
xt152x models: depends on your baseband



Before Starting

Take care of following tasks before you proceed with flashing custom ROM:
Task 1: Install USB drivers for your device on your PC.
Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.
Task 4: USB Debugging should be enabled on your device.
Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.

Let’s see how to flash a lineage os rom on Moto E 2nd gen 2015 using TWRP recovery.Do NOT dirty flash over non-VoLTE cyanogenmod or lineage releases.



How to Install a Lineage os ROM using TWRP Recovery


  1. Download and transfer the Lineage os ROM and Gapps for lineage os you wish to flash to your device’s storage.
  2. Boot your device into TWRP recovery.
  3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
    └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
  • Go back to TWRP main menu, tap on “Install” and select the Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  • After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
  • Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
  • Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.


  • REQUIRED LINKS AND FILES FOR Moto E2 2015 LINEAGE OS 14.1 NOUGAT CUSTOM ROM:


    1.Download gapps for Lineage OS 7.1.1

    2.Download of Lineage 14.1 for Moto E2 2015[Surnia]

    3.How to Root Lineage OS rom Easily

    Share To:
    Magpress

    LineageOS Team

    We are trying hard to provied Lineage os rom for every possible device.To support us like our facebook page and follow on facebook.

    8 comments so far,Add yours

    1. installed the ROM successfully,even though the VoLTE is enabled under the network settings, VoLTE notification doesn't show up, cant make calls on Jio4g network using stock dialer, pls help

      ReplyDelete
    2. Hi, i loved this build running with my moto e 2015. I have facing a problem with the playstore, i can't download anything. Any help would be apprecuated. Thank you.

      ReplyDelete

    3. Help!
      I'm using Lineage OS 14.1 on my Moto E2 (Surnia).

      Everything is running great!
      But there is only one problem, My Sim Card is not working (I even tried another sim card).
      status bar is showing no sim card icon.
      When i change my sim mode from settings that are accessed by dialing this number *#*#46363#*#* The no sim card icon changes to no signal icon and says "Searching for service"
      When i go to settings and open cellullar settings, it says com.phone has stopped working.

      PLZ HELP ME!

      ReplyDelete
    4. Please specify which basebands (for XT152x models) are supported.
      Thanks!

      ReplyDelete