Download Official Lineage OS Mi 3w and Mi 4 (cancro) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:


THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Mi 3w and Mi 4 (cancro) requires the bootloader to be unlocked on the Mi 3w and Mi 4 (cancro) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Mi 3w and Mi 4 (cancro) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known




Before Starting

Take care of following tasks before you proceed with flashing custom ROM:
Task 1: Install USB drivers for your device on your PC.
Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.
Task 4: USB Debugging should be enabled on your device.
Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.





Let’s see how to flash a lineage os rom on Mi 3w and Mi 4 (cancro) using TWRP recovery.

How to Install a official Lineage os on Mi 3w and Mi 4 (cancro) 


  1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
  2. Boot your device into TWRP recovery.
  3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
    └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
  4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
  6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
  7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Mi 3w and Mi 4 (cancro):





1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 for Mi 3w and Mi 4 (cancro)

3.How to Root official Lineage OS rom Easily

Share To:
Magpress

LineageOS Team

We are trying hard to provied Lineage os rom for every possible device.To support us like our facebook page and follow on facebook.

24 comments so far,Add yours

  1. There is no options like "Apps only" or "Apps and ADB" in root access option. There is only adb

    ReplyDelete
  2. All sensors are working fine (Checked in Sensor Box application)

    ReplyDelete
  3. In update settings , still showing January 23rd First Nightly built as an update in the same rom

    ReplyDelete
  4. which device you have? and is the Rom working fine?

    ReplyDelete
  5. With the latest update , usb otg is working

    ReplyDelete
  6. Gyroscope is not working on the latest nightly

    ReplyDelete
  7. I have flashed Lineage 14.1(20170112) and want to update it. I cannot update via TWRP, why not?
    - It keeps saying "error 7"??

    ReplyDelete
  8. In my case i have also faced this issue. It is giving me error 7.

    ReplyDelete
  9. I have followed the instruction given https://forum.xda-developers.com/showthread.php?t=2302599 , but still getting this error. Please suggest what to do

    ReplyDelete
  10. Build used : 14.1.20170306-nightly-cancro
    In the root access, only ADB, no apps
    Another problem : connected with my Bluetooth car kit but no sounds

    ReplyDelete
    Replies
    1. Have you been able to find a solution for the bluetooth problem? I am also having the problem.

      Delete
    2. Sorry... The 20170327 doesnt solve the problem. Hope this problem will be solved soon

      Delete
  11. The given rom link is not for cancro its for XT1022 (Motorola Condor). Pliz link the correct ROM for cancro mi3/mi4

    ReplyDelete
  12. Bluetooth audio only works on Mi4 when the system is just booted and connected to the audio device immediately. If the device is disconnected, the system requires another reboot to get it work again.

    ReplyDelete
  13. Camera starts sometimes by single clicking power button. It should property start with double clicking power button only. Kindly fix this irritative issue.

    ReplyDelete