Download Official Lineage OS Mi 5 (gemini) Nougat 7.1.1. Official Lineage os is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Official LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


DISCLAIMER:


THIS IS AN INITIAL BUILD WHICH MAY NOT BOOT AT ALL. HAVE A BACKUP BEFORE FLASHING THIS AND TRY AT YOUR OWN RISK.

Installing a custom ROM on a Mi 5 (gemini)  requires the bootloader to be unlocked on the Mi 5 (gemini) phone, which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup all data on the phone. You are the only person doing changes to your phone and I cannot be held responsible for the mistakes done by you.

Status of Official Lineage os for Mi 5 (gemini) Nougat 7.1 Custom ROM:

WHAT’S WORKING:
– Not Known
KNOWN ISSUES:
– Not Known




Before Starting

Take care of following tasks before you proceed with flashing custom ROM:
Task 1: Install USB drivers for your device on your PC.
Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.
Task 4: USB Debugging should be enabled on your device.
Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.Also take nandroid backup before installing

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.





Let’s see how to flash a lineage os rom on Mi 5 (gemini) using TWRP recovery.

How to Install a official Lineage os on Mi 5 (gemini) 


  1. Download and transfer the official Lineage os ROM and Gapps for linage os you wish to flash to your device’s storage.
  2. Boot your device into TWRP recovery.
  3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
    └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
  4. Go back to TWRP main menu, tap on “Install” and select the official Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
  6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
  7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

DOWNLOAD OFFICIAL LINEAGE OS FOR Mi 5 (gemini)





1.Download Gapps for Official Lineage OS 7.1.1

2.Download Official Lineage os 14.1 Mi 5(gemini)

3.How to Root official Lineage OS rom Easily

Share To:
Magpress

LineageOS Team

We are trying hard to provied Lineage os rom for every possible device.To support us like our facebook page and follow on facebook.

17 comments so far,Add yours

  1. Cool,hope stable and no bugs)))

    ReplyDelete
  2. Add the Xiaomi Mi Note Virgo (801SD) in support of your good firmware, very sorry that such a legendary smartphone was forgotten your team

    ReplyDelete
  3. Ill install this in this weekend, i wanna try something else than MIUI, really hope this is stable rom, i have MI5 pro (4gb ram, 128gb)

    ReplyDelete
  4. I saw lots of mi5 gemini lineage OS videos all off them are looking like Pixel UI. But when i flash it its looking stock. How can i make it?

    ReplyDelete
  5. great rom!! mi5 user is excited!

    ReplyDelete
  6. im using this rom for 2 day now, all working fine but 1 app - the camera app (google one), it shuts down instantly, ive replace it with another camera app and its working fine

    ReplyDelete
  7. Updater process ended with error 7
    error installing zip file

    ReplyDelete
  8. This rom have a bug about cpu speed,sometimes my highest cpu speed is 2.15ghz,but sometime it will be1.6ghz and cpu-z can't read the right name of cpu

    ReplyDelete
  9. Battery drains faster than CM13. No QC 3.0 unless I'm in TWRP, most USB chargers don't actually charge the phone at all. And now my Mi5 has randomly shut itself off and won't boot or charge. No fastboot and no TWRP.

    ReplyDelete
  10. Updater process ended with error 7
    error installing zip file ... plz help ??

    ReplyDelete
  11. Hi, any body here facing signal drop especially while using LTE?

    ReplyDelete
  12. is there any problem with the fingerprint sensor? and is there any solutions for the problem? thanks.
    anyway this OS is awesome, i love it!

    ReplyDelete